Astm D1559 Free Download.Pdf - Thebookee.net-Books Download

https://thebookee.net/as/astm-d1559-free-download

>>Astm D1559 Free Download.Pdf - Thebookee.net-Books Download Pdf [Fast DOWNLOAD]<<


Related Books

Standard Test Methods for Liquid Limit, Plastic Limit, and ...

Standard Test Methods for Liquid Limit, Plastic Limit, and ...

5 Annual Book of ASTM Standards, Vol 04.09. 6 Annual Book of ASTM Standards, Vol 14.02. D 4318 2. drop onto a hard rubber base. Fig. 1 shows the essential features and critical dimensions of the device. The device may be operated by either a hand crank or electric motor. 6.1.1 Base—Ahard rubber base having a Type D Durometer hardness of 80 to 90, and resilience rebound of at least 77 % but n

Continue Reading...
Standard Test Method for Penetration of Bituminous Materials1

Standard Test Method for Penetration of Bituminous Materials1

and free of burrs. When the surface texture is measured in accordance with American National Standard B 46.1 or ISO 468 the surface roughness height, Ra, of the tapered cone shall be 0.2 to 0.3 µm (8 to 12 µin.) arithmetic average. The surface roughness height, Ra, of the needle shank shall be 0.025 to 0.125 µm (1 to 5 µin.). The needle ...

Continue Reading...
Standard Test Method for Density and Unit Weight of Soil ...

Standard Test Method for Density and Unit Weight of Soil ...

1 This test method is under the jurisdiction of ASTM Committee D-18 on Soil and Rock and is the direct responsibility of Subcommittee D18.08 on Special and Construction Control Tests. Current edition approved March 10, 2000. Published April 2000. Originally published as D 1556 – 58 T. Last previous edition D 1556 – 90 (1996)e1.

Continue Reading...
Standard Test Method for Density and Unit Weight of Soil ...

Standard Test Method for Density and Unit Weight of Soil ...

2.1 ASTM Standards: 2 D 653 Terminology Relating to Soil, Rock, and Contained Fluids D 698 Test Methods for Laboratory Compaction Character- istics of Soil Using Standard Effort (12 400 ft-lbf/ft3(600 kN-m/m3)) D 1557 Test Methods for Laboratory Compaction Charac-teristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)) D 2216 Test Methods for Laboratory Determination of Wa ...

Continue Reading...
Laboratory Testing

Laboratory Testing

3.17 Calculation of Void Content in Bituminous Mixes ASTM D3203 and AASHTO pp19-93 3.18 Marshall Test ASTM D1559-89 3.19 Marshall Mix Design ASTM D1559-89 3.20 Refusal Density Mix Design TRL Overseas Road Note 31, app. D:1990 3.21 Indirect Tensile Strength Test ASTM D3967 and NPRA 014 test 14.554 3.22 Determination of Binder Content and Aggregate Grading by Extraction ASTM D2172-88, method B 3 ...

Continue Reading...
MARSHALL MIX DESIGN AND ANALYSIS - Shodhganga

MARSHALL MIX DESIGN AND ANALYSIS - Shodhganga

the specification ASTM D 1559 (2004), which is defined as the maximum load carried by a compacted specimen at a standard test temperature of 60˚C. In this test compressive loading was applied on the specimen at the rate of 50.8 mm/min till it was broken. The temperature 60˚C represents the weakest condition for a bituminous pavement. The flexibility is measured in terms of the ‘flow value ...

Continue Reading...
5.16.14 MARSHALL TESTS OF BITUMINOUS MIXES

5.16.14 MARSHALL TESTS OF BITUMINOUS MIXES

ASTM D 1559; Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus . 02-98 Page 2/12 5.9.14 (5.16.14) KT-14 c. APPARATUS c.1. Specimen Mold Assembly: A cylindrical mold having an inside diameter of 101.6 + 0.25 mm (4.000 + 0.010 in)1 and a length of approximately 90 mm (3 7/16 in). The mold is open at each end and is equipped with a removable collar and a ...

Continue Reading...
ASTM MATERIAL CODES - FNW Valve

ASTM MATERIAL CODES - FNW Valve

ASTM MATERIAL CODES: STAINLESS STEELS Pipe: Valves Flanges: Weld Fittings Screwed & Socket Fittings: A312 T304 A182 F-304/A351 CF8: A182 F-304 A403 WP-304: A182 F-304 A312 304L: A182 F-304L/A296 CF3 A182 F-304L: A403 WP-304L A182 F-304L : A312 T316 A182 F-316/A351 CF8M: A182 F-316 A403 WP-316: A182 F-316 A312 316L: A182 F-316L/A296 CF3M A182 F-316L: A403 WP-316L A182 F-316L: A312 321 A182 F ...

Continue Reading...
Chapter 11 MARSHALL METHOD OF ASPHALT-CONCRETE MIX DESIGN

Chapter 11 MARSHALL METHOD OF ASPHALT-CONCRETE MIX DESIGN

The maximum specific gravity of aggregate mixture should be obtained as per ASTM D2041, however because of the difficulty in conducting this experiment an alternative procedure could be utilized to obtain the maximum specific gravity using the following equation: bmf mf bfa fa bca ca ca fa mf bam G P G P G P P P P G + + + + = where, G mp = maximum specific gravity of paving mixtures. Pca, Pfa ...

Continue Reading...
Designation: D 156 – 02 An American National Standard

Designation: D 156 – 02 An American National Standard

D 1500 Test Method for ASTM Color of Petroleum Prod-ucts (ASTM Color Scale)2 D 4057 Practice for Manual Sampling of Petroleum and Petroleum Products3 3. Terminology 3.1 Definitions of Terms Specific to This Standard: 3.1.1 Saybolt color—an empirical definition of the color of a clear petroleum liquid based on a scale of −16 (darkest) to +30 (lightest). The number is derived by finding ...

Continue Reading...
MOLD AND PLUNGERS MODELS DESCRIPTION STANDARDS

MOLD AND PLUNGERS MODELS DESCRIPTION STANDARDS

astm d-1559 / aashto t-245 models description standards b9131 automatic compactor, single unit, 110v / 60 hz astm d-1559 / b9132 automatic compactor, single unit, 220v / 50 hz aashto t-245 accessories description b9114 6" marshall stability breaking head w/ guides b9115 4" marshall stability breaking head w/ guides b9116 4" lottman breaking head

Continue Reading...