Technical Data Sheet - Jotun-Books Download

Technical-Data-Sheet---Jotun.pdf

>>Technical Data Sheet - Jotun-Books Download Pdf [Fast DOWNLOAD]<<


Related Books

Technical Data Sheet - Jotun

Technical Data Sheet - Jotun

Technical Data Sheet Penguard Topcoat Thinner/Cleaning solvent Thinner: Jotun Thinner No. 17 Nozzle tip (inch/1000): Pressure at nozzle (minimum): Guiding data for airless spray

Continue Reading...
Technical Data Sheet Jotamastic 87 Aluminium

Technical Data Sheet Jotamastic 87 Aluminium

Jotamastic 87 Aluminium The provided data is typical for factory produced products, subject to slight variation depending on colour. VOC-Solvent Emission Directive SED (1999/13/EC) 173g/kg Gloss level: According to Jotun Performance Coatings' definition. All data is valid for mixed paint. Recommended film thickness per coat Minimum Maximum Typical

Continue Reading...
Technical Data Sheet - jotun.com

Technical Data Sheet - jotun.com

Jotamastic 87 Aluminium Jotamastic 87 GF General: Primarily designed for maintenance and repair. Marine: Outside hulls, exterior and interior areas, including water ballast tanks. Protective: Recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Refer to separate TDS for each variant ...

Continue Reading...
Technical Data Sheet Application Guide - Jotun

Technical Data Sheet Application Guide - Jotun

This product complies with ASTM D520 type II zinc dust. Technical Data Sheet Application Guide 684;11420 1,2 684 Scope The Application Guide offers product details and recommended practices for the use of the product. The Application Guide (AG) must be read in conjunction with the relevant specification, Technical Data Sheet (TDS) and Safety Data Sheet (SDS) for all the products used as part ...

Continue Reading...
Technical Data Sheet - Jotun

Technical Data Sheet - Jotun

Technical Data Sheet Tankguard 412 The information in this document is given to the best of Jotun's knowledge, based on laboratory testing and practical experience.

Continue Reading...
Jotun Marine Tank Coating Notes - jotunprl.com

Jotun Marine Tank Coating Notes - jotunprl.com

Tankguard HB 3 x 100 µm DFT Tankguard Special 3 x100 µm DFT Tankguard Special Ultra 3 x100 µm DFT For the Resistance List information to be valid the coating system(s) shall be applied and cured in accordance with the relevant Technical Data Sheet, Application Guide (if available) and Project Specification issued by Jotun.

Continue Reading...
Technical Data Sheet Resist 78 - Modern Depot Sdn. Bhd.

Technical Data Sheet Resist 78 - Modern Depot Sdn. Bhd.

Jotun Zinc 100 Comp B 2,6part(s) Surface preparation To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any contamination. Date of issue:28 April 2016 Page: 2/5 This Technical Data Sheet supersedes those previously issued. The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the Application ...

Continue Reading...
Technical Data Sheet - jotun.com

Technical Data Sheet - jotun.com

This technical data sheet supersedes those previously issued. The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com

Continue Reading...
Technical Data Sheet Jotafloor SF PR 150 - Intertintas

Technical Data Sheet Jotafloor SF PR 150 - Intertintas

Jotafloor SF PR 150 Comp A 3 part(s) Jotafloor SF PR 150 Comp B 1 part(s) ... Technical Data Sheet Jotafloor SF PR 150 Caution This product is for professional use only. The applicators and operators shall be trained, experienced and have the capability and equipment to mix/stir and apply the coatings correctly and according to Jotun's technical documentation. Applicators and operators shall ...

Continue Reading...
Technical Data Sheet Jotafloor PU Topcoat

Technical Data Sheet Jotafloor PU Topcoat

Jotafloor PU Topcoat Comp A 5 part(s) Jotafloor PU Topcoat Comp B 1 part(s) ... For your nearest local Jotun office, please visit our website at www.jotun.com . Technical Data Sheet Jotafloor PU Topcoat Drying and Curing time Surface (touch) dry Walk-on-dry 24 h16 h10 h5 h 3 h 48 h24 h16 h7 h 3 h 24 d21 d14 d7 d 4 d Substrate temperature 5 °C10 °C23 °C40 °C Dried/cured for service 0 °C ...

Continue Reading...
Technical Data Sheet - Jotun

Technical Data Sheet - Jotun

612;613 1,2 613 epoxy ^(ValidationDate) Technical Data Sheet Penguard HB Product description This is a two component, polyamide cured, high molecular weight epoxy coating. Designed as a high build, all purpose coating for new construction. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel ...

Continue Reading...