Specification To En 13852 1 General Purpose Offshore Cranes-Books Download

Specification to EN 13852 1 General purpose offshore cranes

2019 | 821 views | 19 Pages | 518.96 KB

SupplementarySpecification to EN 13852 -1 General purpose offshore cranes Page 6 of 16 S-617 December 2018 5.3 Equipment and components 5.3.2 Non electrotechnical equipment Add to subclause Equipment and components including valves, filters, fittings, bearings and seals in equivalent service shall be



Revision history
VERSION DATE AMENDMENTS
1 0 December 2018 Issued for publication
Acknowledgements
This IOGP Specification was prepared by a Joint Industry Project 33
Standardization of Equipment Specifications for Procurement organized
by IOGP with support by the World Economic Forum WEF
Disclaimer
Whilst every effort has been made to ensure the accuracy of the information
contained in this publication neither IOGP nor any of its Members past present or
future warrants its accuracy or will regardless of its or their negligence assume
liability for any foreseeable or unforeseeable use made thereof which liability is
hereby excluded Consequently such use is at the recipient s own risk on the basis
that any use by the recipient constitutes agreement to the terms of this disclaimer
The recipient is obliged to inform any subsequent recipient of such terms
This publication is made available for information purposes and solely for the private
use of the user IOGP will not directly or indirectly endorse approve or accredit the
content of any course event or otherwise where this publication will be reproduced
Copyright notice
The contents of these pages are International Association of Oil Gas Producers
Permission is given to reproduce this report in whole or in part provided i
that the copyright of IOGP and ii the sources are acknowledged All other rights are
reserved Any other use requires the prior written permission of IOGP
These Terms and Conditions shall be governed by and construed in accordance
with the laws of England and Wales Disputes arising here from shall be exclusively
subject to the jurisdiction of the courts of England and Wales
Supplementary Specification to EN 13852 1 General purpose offshore cranes
Foreword
This specification was prepared under a Joint Industry Project 33 JIP33 Standardization of Equipment
Specifications for Procurement organized by the International Oil Gas Producers Association IOGP with
the support from the World Economic Forum WEF Ten key oil and gas companies from the IOGP
membership participated in developing this specification under JIP33 Phase 2 with the objective to leverage
and improve industry level standardization for projects globally in the oil and gas sector The work has
developed a minimized set of supplementary requirements for procurement with life cycle cost in mind based
on the ten participating members company specifications resulting in a common and jointly approved
specification and building on recognized industry and international standards
This specification has been developed in consultation with a broad user and supplier base to promote the
opportunity to realize benefits from standardization and achieve significant cost reductions for upstream project
costs The JIP33 work groups performed their activities in accordance with IOGP s Competition Law Guidelines
November 2014
Recent trends in oil and gas projects have demonstrated substantial budget and schedule overruns The Oil
and Gas Community within the World Economic Forum WEF has implemented a Capital Project Complexity
CPC initiative which seeks to drive a structural reduction in upstream project costs with a focus on industry
wide non competitive collaboration and standardization The vision from the CPC industry is to standardize
specifications for global procurement for equipment and packages facilitating improved standardization of
major projects across the globe While individual oil and gas companies have been improving standardization
within their own businesses this has limited value potential and the industry lags behind other industries and
has eroded value by creating bespoke components in projects
This specification aims to significantly reduce this waste decrease project costs and improve schedule through
pre competitive collaboration on standardization This document defines the supplementary requirements to
recognized industry standard EN 13852 2nd Edition 2013 Cranes Offshore cranes Part 1 General purpose
offshore cranes which is indispensable for the application of this specification
Following agreement of the relevant JIP33 work group and approval by the JIP33 Steering Committee the
IOGP Management Committee has agreed to the publication of this specification by IOGP Where adopted by
the individual operating companies this specification and associated documentation aims to supersede
existing company documentation for the purpose of industry harmonized standardization
Page 1 of 16 S 617 December 2018
Supplementary Specification to EN 13852 1 General purpose offshore cranes
Table of Contents
Foreword 1
Introduction 3
2 Normative references 5
4 List of significant hazards 5
5 Safety requirements and or protective measures 5
5 2 Strength and stability 5
5 3 Equipment and components 6
5 4 Drive systems 7
5 6 Noise reduction 8
5 7 Access guards etc 9
5 8 Controls indicators and limiting devices 10
5 9 Protection systems 11
5 11 Spill protection 11
6 Verification of the safety requirements and or protective measures 11
6 3 Verification records 11
7 Information for use 12
7 1 Documentation 12
7 4 Marking 12
7 5 Component identification system 12
Annex C normative Environmental influences 14
C 7 Corrosion protection 14
Annex E normative Material selection 15
E 5 Welded structures 15
Bibliography 16
Tables
Table 6 Purchaser system identification items 13
Table 7 Manufacturer sub assembly identification items 13
Page 2 of 16 S 617 December 2018
Supplementary Specification to EN 13852 1 General purpose offshore cranes
Introduction
The purpose of this specification is to define a minimum common set of supplementary requirements for
procurement of general purpose offshore cranes to EN 13852 1 2nd Edition 2013 for application in the
petroleum and natural gas industries
This JIP33 standardized procurement specification follows a common document structure comprising the four
documents as shown below which together with the purchase order define the overall technical specification
for procurement
JIP33 Specification for Procurement Documents
Supplementary Technical Requirement
It is required to use all of these documents in conjunction with each other when applying this specification as
follows
IOGP S 617 Supplementary specification to EN 13852 1 General purpose offshore cranes
This specification is written as an overlay to EN 13852 1 following the clause structure of
the parent standard to assist in cross referencing the requirements Where clauses from the
parent standard EN 13852 1 are not covered in this specification there are no
supplementary requirements or modifications to the respective clause The terminology used
within this specification follows that of the parent standard and otherwise is in accordance
with ISO IEC Directives Part 2
Modifications to the parent standard defined in this specification are identified as Add add
to clause or add new clause Replace part of or entire clause or Delete
IOGP S 617D Datasheet for General purpose offshore cranes
This document provides project specific requirements where the supplementary specification
and its parent standard require the user to define an application specific requirement It
follows the clause structure of the parent standard and this specification It also includes
information required by the user for technical evaluation Additional purchaser supplied
documents are also listed in the datasheet to define scope and technical requirements for
enquiry and purchase of the equipment
Page 3 of 16 S 617 December 2018


Related Books

TECHNICAL SPECIFICATION OFFSHORE AHC CRANE STIFF BOOM

TECHNICAL SPECIFICATION OFFSHORE AHC CRANE STIFF BOOM

EN 13852-1:2013 – “Cranes – Offshore Cranes, Part 1 General purpose offshore cranes” IEC 61892 - Mobile and fixed offshore units - Electrical installations Quality System Standard EN ISO 9001:2008 certified and accredited by DNV Quality

Continue Reading...
FUNCTIONAL SPECIFICATION FOR DIESEL-HYDRAULIC PEDESTAL ...

FUNCTIONAL SPECIFICATION FOR DIESEL-HYDRAULIC PEDESTAL ...

1.3 Codes / Standards and Compliance. BS EN 13852-1, section 2 refers to the relevant codes specific with that code and will not be repeated in this document, Appendix 1 covers the additional specific codes relevant to the crane purchase. 1.4 Crane Requirements and Operating Conditions. 1.4.1 General Descriptions

Continue Reading...
Powered Fiber Cable System - CommScope.com

Powered Fiber Cable System - CommScope.com

1. Provide a powered cabling solution that combines power and optical fiber communications into one complete system. 2. The cable must combine electrical power conductors and optical fiber into one package to speed up installations and simplify power and communications delivery to devices. B. Powered Fiber Cable System 1. System must be a ...

Continue Reading...
Fbii Alarm System User Manual

Fbii Alarm System User Manual

standard specification section 13852. EST Alarm System Manual / Download EST installation manual, EST / Faraday / FBII / FCI /. Fbii XL4600SM user manual and fbii dms- XL4600SM programming manual for your fbii XL4600SM alarm system. FBII XL4600SM Alarm Manual, complete. 1 C Brand Logo. Product Details, User Manual, Demonstration Video, Staff ...

Continue Reading...
Pressure Sensitive Safety Mat SystemMatGuard Mat Manager ...

Pressure Sensitive Safety Mat SystemMatGuard Mat Manager ...

ISO 12100-1, -2 (EN 292 - 1&2) Safety of machinery - Basic concepts - General principles for design - Parts 1 and 2 ISO 13852 (EN 294): Safety of machinery - Safety distances to prevent danger zones being reached by upper limbs. ISO 13853 (EN 811): Safety of machinery - Safety distances to prevent danger zones being reached by lower limbs.

Continue Reading...
Ge Est 3 Manual - anyswinggoesdanceclub.com

Ge Est 3 Manual - anyswinggoesdanceclub.com

INSTALLATION MANUAL. 2007 13852-3 intelligent fire alarm system construction standard specification section 13852 intelligent fire alarm system part 1 -general Est 3 fire alarm system manual EST 3 Alarm Manual | Find, download and program your existing EST 3 security alarm system with the manufacturer EST 3 alarm manual, EST 3 alarm ...

Continue Reading...
2 GHz to 30 GHz, GaAs pHEMT MMIC Low Noise Amplifier Data ...

2 GHz to 30 GHz, GaAs pHEMT MMIC Low Noise Amplifier Data ...

2 GHz to 30 GHz, GaAs pHEMT MMIC Low Noise Amplifier Data Sheet HMC8400 Rev. B Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable.

Continue Reading...
ÖNORMEN - Ausgabe November 2009 - WKO.at

ÖNORMEN - Ausgabe November 2009 - WKO.at

1 ÖNORMEN - Ausgabe November 2009 . 1. ÖNORM-Entwürfe (Ausgabe 1.11.2009) A 6403 Runden von Zahlen und Messergebnis-sen B 3132 Gesteinskörnungen für ungebundene und hydraulisch gebundene Gemische für In-genieur- und Straßenbau - Regeln zur Um-setzung der EN 13242 B 3660 Abdichtungsbahnen - Bitumenbahnen

Continue Reading...
English=> page 2, Deutsch=> seite 3, Svenska => sidan 4 ...

English=> page 2, Deutsch=> seite 3, Svenska => sidan 4 ...

A 1 NPD EN 1745 Tabel 1 1800 kg/m3 (D1) NPD F2 NPD Gråsten d. 1/11-2014 Peter Matzen Sted /Dato Netto tørdensitet Frostbestandighed Farlige stoffer DS/EN 771-1:2011 10. Ydeevnen for den byggevare, der er anført i punkt 1 og 2, er i overensstemmelse med den deklarerede ydeevne i punkt 9.

Continue Reading...
NCSAE17AT - nichia.co.jp

NCSAE17AT - nichia.co.jp

1 to 5°C per sec Recommended Soldering Pad Pattern ( " ) Unit: mm) 0. 8 6 1.4.2 * This LED is designed to be reflow soldered to a PCB. If dip soldered or hand soldered, Nichia will not guarantee its reliability. * Reflow soldering must not be performed more than twice.

Continue Reading...
ÖNORMEN - Ausgabe Oktober 2002

ÖNORMEN - Ausgabe Oktober 2002

ÖNORMEN - Ausgabe Oktober 2002 1. ÖNORM-Entwürfe CEN/TS 14507 Teil 1 und 2; Vornorm; Inhalations-systeme für Stickstoffmonoxid CEN/TS 14547 Vornorm; Sampling schemes for

Continue Reading...