PVC Sch 40 Pipe Fittings

ASME B16.5 Pipe Flanges and Flanged Fittings Published ...

ASME B16.5 Pipe Flanges and Flanged Fittings Published ...

Question: According to ASME B16.5-1996 edition, 1998 Addenda (a), is it acceptable for the flange thickness to taper to the edge and be thinner than the flange thickness “C” dimension listed in the dimensional tables? Reply: No. See para. 7, Tolerances.

[Read More] [Donwload pdf] [Read Online]
Pipe Flanges and Flanged Fittings - Abangah Sanaat Baran

Pipe Flanges and Flanged Fittings - Abangah Sanaat Baran

ASME B16.5-2009 (Revision of ASME B16.5-2003) Pipe Flanges and Flanged Fittings NPS 1? 2 Through NPS 24 Metric/Inch Standard AN AMERICAN NATIONAL STANDARD

[Read More] [Donwload pdf] [Read Online]
Polypropylene Pressure Piping Technical Handbook Systems

Polypropylene Pressure Piping Technical Handbook Systems

to the large area of pipe to fitting contact (3–5 times the cross sectional area of the pipe), the resulting joint is actually several times stronger than the pipe itself. The pipe and fittings for this system are also manufactured to have an interference fit; because of this interference, it

[Read More] [Donwload pdf] [Read Online]
Sanitary Sewer System Design and Construction Standards ...

Sanitary Sewer System Design and Construction Standards ...

5. gravity sanitary sewer system design standards a. general b. gravity sewer system design criteria c. capacity design d. infiltration e. sewer pipes f. separation of water mains and sewers g. cover h. ductile iron pipe locations i. manholes 6. gravity sanitary sewer materials for construction a. general b. pipe and fittings c. manholes

[Read More] [Donwload pdf] [Read Online]
DUAL WALL FABRICATED TEES 4 - 30 DIAMETER PART - ads-pipe.com

DUAL WALL FABRICATED TEES 4 - 30 DIAMETER PART - ads-pipe.com

(450 x 200 mm) (545 mm) (476 mm) 18 x 10 in 34.8 in 20.8 in (450 x 250 mm) (885 mm) (529 mm) 18 x 10 in 24.1 in 18.3 in (450 x 250 mm) (613 mm) (465 mm) 18 x 10 in 24.1 in 18.3 in (450 x 250 mm) (613 mm) (465 mm) * = PLAIN END ST = SOIL TIGHT WT = WATER TIGHT DRAWING #: 2415 DRAWN BY: JCB 04.30.06 APPROVED BY: JCB 06.26.07 NOTE: ALL FITTINGS DIMENSIONS ARE FOR REFERENCE ONLY REVISIONS: NJP 06 ...

[Read More] [Donwload pdf] [Read Online]
Small Diameter N-12 Pipe and Fittings Brochure 6 page 04-19

Small Diameter N-12 Pipe and Fittings Brochure 6 page 04-19

ADS “Terms and Conditions of Sale” are available on the ADS website, www.ads-pipe.com ... 8” (200 mm) Clean Out 0874AG 10” (250 mm) Clean Out 1074AG 12” (300 mm) Clean Out 1274AG Besides injection molded HDPE fittings, ADS offers a full line of products to make your small diameter pipe connections watertight, fast, and economical. Nyloplast provides a complete offering of PVC ...

[Read More] [Donwload pdf] [Read Online]
Sale Day Sale Catalogue - Corporate Auction Solutions

Sale Day Sale Catalogue - Corporate Auction Solutions

14 Hilti DX450 Nail Gun 15 Draper Cordless Drill & Charger 16 2 No Electric Planers & 1 No Sander 17 Black & Decker Cordless Drill C/W Charger 18 2 No Boxes of CD's, DVD's Etc 19 Box Lot of New Waste Pipe Fittings 20 Pine Towle Rail 21 Industrial Wallpaper Stripper 22 Drill, Planer Battery & Charger with Drill Box 23 110V Milwaukee Drill 24 Oak ...

[Read More] [Donwload pdf] [Read Online]
Guide Specification for Copper and Copper Alloy Building ...

Guide Specification for Copper and Copper Alloy Building ...

1. MSS-SP-58 Pipe Hangers and Supports - Materials, Design and Manufacture. 2. MSS-SP-69 Pipe Hangers and Supports - Selection and Application. 3. MSS-SP-73 Silver Brazing Joints for Wrought and Cast Solder-Joint Fittings. 4. MSS-SP-89 Pipe Hangers and Supports - Fabrication and Installation Practices. F. Compressed Gas Association: 1. Pamphlet ...

[Read More] [Donwload pdf] [Read Online]
Corporate Headquarters SHEET METAL CONNECTORS, INC.

Corporate Headquarters SHEET METAL CONNECTORS, INC.

Flat Oval Spiral Pipe & Fittings Sheet Metal Connectors, Inc. (SMC) Sheet Metal Connectors, Inc. flat oval single wall duct and fittings are one part of our complete line of HVAC products. Flat oval duct has been designed for restricted space conditions that cannot accept round spiral duct. Flat Oval Spiral Pipe is

[Read More] [Donwload pdf] [Read Online]
C906-99 Polyethylene (PE) Pressure Pipe and Fittings, 4 In ...

C906-99 Polyethylene (PE) Pressure Pipe and Fittings, 4 In ...

Title: C906-99 Polyethylene (PE) Pressure Pipe and Fittings, 4 In. (100 mm) Through 63 In. (1,575 mm), For Water Distibution and Transmission Author

[Read More] [Donwload pdf] [Read Online]
MATERIAL SPECIFICATION FOR PRESSURE POLYETHYLENE PIPE PRODUCTS

MATERIAL SPECIFICATION FOR PRESSURE POLYETHYLENE PIPE PRODUCTS

according to the requirements of AWWA C906 for fittings 100 mm through 1,600 mm and CSA B137.1 for fittings less than 100 mm diameter. 1842.07 PRODUCTION . 1842.07.01 Requirements . The requirements for the production of polyethylene pipe and tubing shall be according AWWA C901 or AWWA C906.

[Read More] [Donwload pdf] [Read Online]
INSTRUMENTATION PIPE FITTINGS - jilfitting.co.kr

INSTRUMENTATION PIPE FITTINGS - jilfitting.co.kr

Pipe thread sealant is recommended for a leak tight seal. Teflon tape is commonly used only for installation of the pipe fittings with male thread. Make sure both male and female threads clean. Warp Teflon tape clockwise from the first thread. Two time of wrapping is recommended. Don’t overhang tape on the first thread as it might be entered the system. Cut off excess tape. Cleaning Uni-Lok ...

[Read More] [Donwload pdf] [Read Online]
SAMPLE SPECIFICATION FOR HIGH DENSITY POLYETHYLENE (HDPE ...

SAMPLE SPECIFICATION FOR HIGH DENSITY POLYETHYLENE (HDPE ...

• ASTM D 2774 Standard Practice for Underground Installation of Thermoplastic Pressure Piping • ASTM F 3124 Standard Practice for Data Recording the Procedure Used to Produce Heat Butt Fusion Joints • ASTM D 3261 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing

[Read More] [Donwload pdf] [Read Online]
current pricing, updated daily. Double Containment Fittings

current pricing, updated daily. Double Containment Fittings

See Double Containment Design & Installation Guideat the end of this price schedule for additional details on design, installation and different configuration applications. DC fitting sizes are listed through 12", but additional sizes are available on request. CONFIGURATIONS DC Pipe: Spears® DC Fittings can be used with any standard pipe of the corresponding size and schedule. As a result ...

[Read More] [Donwload pdf] [Read Online]
PRICE SCHEDULE: Tube Fittings and Valves Q-2015

PRICE SCHEDULE: Tube Fittings and Valves Q-2015

AN Tube Pipe CBC-Lok CCTF List Bag/Box Swagelok CS-Lok CCTF List Bag/Box Parker CPI Size Size Part No. Part No. Price Quantity Part No. Part No. Part No. Price Quantity Part No.

[Read More] [Donwload pdf] [Read Online]
Chapter 5 - Standard Specifications, Standad Test Methods ...

Chapter 5 - Standard Specifications, Standad Test Methods ...

2. Standard requirements relating to pipe pressure rating, dimensions, fittings and joints. 3. Codes, standards and recommended practices governing the application of PE pipe systems in a variety of end uses. Readers seeking information on PE pipes of corrugated wall construction are invited to visit PPI’s web site at

[Read More] [Donwload pdf] [Read Online]
Stipulation of Standards & Requirements for Water Fittings ...

Stipulation of Standards & Requirements for Water Fittings ...

All water fittings such as pipes, pipe fittings, valves, taps/mixers, urinal flush valves, flush valves for WCs, dual-flush low capacity flushing cisterns, materials, etc. for use in potable water service installations in Singapore shall comply with the standards and requirements

[Read More] [Donwload pdf] [Read Online]
Singapore Brochure 05-9-17

Singapore Brochure 05-9-17

Ethylene) pipes & fittings, PPR (Polypropylene) pipe & fittings and various kinds of valves for all the water and gas infrastructure projects in Singapore. We are closely associated to the infrastructure, construction industry as well for supply of piping and valves materials for high rise skyscrapers and other buildings services.

[Read More] [Donwload pdf] [Read Online]
SharkBite New Construction System Installation Guide

SharkBite New Construction System Installation Guide

3 The purpose of this guide is to familiarize plumbing professionals with the SharkBite® Connection System, and the recommended method of installing the SharkBite® EvoPEX® system, SharkBite Universal brass push-to-connect fittings, and SharkBite PEX Pipe. SharkBite EvoPEX fittings and SharkBite Universal brass fittings are for use

[Read More] [Donwload pdf] [Read Online]
PEXa PLUMBING DESIGN AND INSTALLATION GUIDE

PEXa PLUMBING DESIGN AND INSTALLATION GUIDE

Within these model codes, the standard requirements for PEX pipe and fittings are ASTM F877 or CSA B137.5. These standards define the requirements and test methods for PEX piping systems. The REHAU PEXa plumbing system is third-party certified by NSF International (www.nsf.org) to the following standards:

[Read More] [Donwload pdf] [Read Online]
Isometric Pipe Drawing Symbols Pdf - WordPress.com

Isometric Pipe Drawing Symbols Pdf - WordPress.com

Isometric Pipe Drawing Symbols Pdf Unlike orthographic drawings, piping isometric drawings allow the pipe line to The symbols that represent fittings, Valves and flanges are modified to adapt. Piping-Line Numbering-Isometric Drawing,Welding,Non Destructive Examination -NDT/NDE. An isometric drawing is a type of pictorial drawing in It's

[Read More] [Donwload pdf] [Read Online]
Spacing of Hangers For Steel Pipe - PHD Manufacturing

Spacing of Hangers For Steel Pipe - PHD Manufacturing

Steel Pipe Data SCHEDULE 10, 40 & 80 Spacing of Hangers For Steel Pipe Note: Spacing and capacities are based on pipe filled with water. Additional valves and fittings increase the load and therefore closer hanger spacing is required. *Many Codes and specifications require pipe hangers to be spaced every 10 ft 3.05m regardless of size. Check ...

[Read More] [Donwload pdf] [Read Online]
Pressure Loss Coefficients of 6, 8 and 10-inch Steel Pipe ...

Pressure Loss Coefficients of 6, 8 and 10-inch Steel Pipe ...

Pressure Loss Coefficients of 6, 8 and 10-inch Steel Pipe Fittings By Chengwei (Alex) Ding, Luke Carlson, Christopher Ellis and Omid Mohseni Prepared for American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (Final Report on ASHRAE Research Project No. 1116-TRP) February 2005 Minneapolis, Minnesota . i The University of Minnesota is committed to the policy that all ...

[Read More] [Donwload pdf] [Read Online]
Aspirating Pipe & Components Guide

Aspirating Pipe & Components Guide

Part No. 3KH-PVC Non-Return Valve Part No. RSV-R25 Pipes & Fittings (Red 25mm ABS fi ttings) 10 Pipes & Fittings Pipes & Fittings (Red 25mm ABS fittings) Blow through valve Part No. UK109070 Steam Trap Part No. KA-1. 11 Clips & Bracketing Clips and Bracketing Pipe brackets need to be made with the inside diameter of the bracket marginally larger than that of the pipe outer diameter

[Read More] [Donwload pdf] [Read Online]
Hydraulic Hose Fittings - parker.com

Hydraulic Hose Fittings - parker.com

SAE J476A / J516 – AGN 02 Female NPTF Pipe – Rigid Straight SAE J476A / J516 03 Male JIC 37° – Rigid Straight ISO12151-5-S – AGJ 05 Male SAE Straight Thread with O–Ring – Rigid Straight ISO 11926 – SAE J516 06 Female JIC 37° – Swivel Straight ISO12151-5-SWS – DKJ 68 Female JIC 37° / SAE 45° Swivel DKJ 08 Female SAE 45 ...

[Read More] [Donwload pdf] [Read Online]
Section 6 - Pipeline Flushing, Hydrostatic Testing, and ...

Section 6 - Pipeline Flushing, Hydrostatic Testing, and ...

C600, “Installation of Ductile Iron Mains and Their Appurtenances” or AWWA Standard C605, “Underground Installation of Polyvinyl Chloride (PVC) Pressure Pipe and Fittings for Water.” After completion of the hydrostatic testing, the subcontractor shall provide a signed copy of all

[Read More] [Donwload pdf] [Read Online]
PVC Pipe—Design and Installation

PVC Pipe—Design and Installation

Hydrostatic design stress ratings for pipe compounds are established after 10,000 hr of hydrostatic test-ing. Long-term performance of injection molded PVC fittings compounds are subject to at least 2,000 hr of hydrostatic testing. AWWA’s PVC pipe and fittings standards define the basic properties of PVC com-

[Read More] [Donwload pdf] [Read Online]
Carbon & Alloy Tubing - Castle Metals

Carbon & Alloy Tubing - Castle Metals

A519 (CDS) ASTM A519 (HFS) ASTM A519 (HFS) L80 P110 ASTM A534 ASTM A295 ASTM A485 Structural columns, beams, supports, heavy equipment frames, light and sign posts, telescoping devices. Rolls, machined parts, and pipe lines for conveyance of liquids or gases. Fittings, couplings, fluid lines. Shafts, special tools and machined parts. All forms ...

[Read More] [Donwload pdf] [Read Online]
Metline Industries ? Manufacturer of Pipes Fittings ...

Metline Industries ? Manufacturer of Pipes Fittings ...

• Thickness and outside diameters of swage nipples shall correspond to those of the appropriate nominal pipe size. Swage nipples are offered in threaded ends per ASME B1.20.1 and beveled ends per ASME B16.25. Swage Nipples Manufacturer in India – MS-SP-95 Standard SIZE Outside Diameter A Wall Thickness T1 T2

[Read More] [Donwload pdf] [Read Online]
Forged Fittings, Pipe Fittings, Forged Pipe Fittings ...

Forged Fittings, Pipe Fittings, Forged Pipe Fittings ...

Swaged Nipples 3/8”x1/4” 17.1 13.7 64 2.3 MSS-SP-95-2006 Outside Diameter Wall Thickness T1 T2 Nominal Pipe Size (NPS) Large End D1 Small

[Read More] [Donwload pdf] [Read Online]